Navigation  

Final Sale Clearance





iJDMTOY Easy Shopping Guide

iJDMTOY Daily Deal

LED Headlights

HID Conversion Kit

LED Daytime Running Lights

LED Bulbs Special Price

LED License Plate Lights

LED Knight Rider Lights

BMW E92 LED Angel Eyes


 


Home
> Universal Fit Products > Adapters and Wiring Harness >


(2) 4-Step Sequential Flash Module Box For Car Front or Rear Turn Signal Light Retrofit Use

4-Step Sequential Flash Module Box For Car Turn Signal Light




 
Price: $18.99

Stock:In Stock


Status:
Usually Ships in 24 Hours

SKU:
AA1168
Qty:

Details FAQ/Install
 

Features

  • 2 pieces for both driver side and passenger side
  • Input: 12V DC
  • Output: 12V DC
  • Four sequential outputs (each lasts about 0.2 seconds, with a complete rotation of 0.8 seconds for each turn signal blink)
  • Installation diagram below
  • See more product details

Sequential LED Flashing Module

Sequential LED Flashing Module

Sequential LED Flashing Module

Sequential LED Flashing Module

Additional Information

This listing features 2 pieces of 4-step sequential flashing module boxes that are good for headlight or tail light sequential turn signal retrofit.

There are four outputs on each sequential module box, with each output lasting approximately 0.2 seconds, giving you a total of 0.8 seconds for a complete rotation.

Since this is a highly customizable product, the order of the wires are not labeled to allow for creative liberty. Installers can use the module box to perform as a sequential function or even a flashing function.

To determine the corresponding wire order, simply connect the four groups of wires to the LED lights and observe the flash order.


For more pictures, please click the "Gallery Picture" Tab above

Warranty Terms and Conditions

Write a review to win a HID conversion kit

Average Customer Review:

4.5 of 5
Total Reviews: 2 Write a review.


  0 of 0 people found this product review helpful:
 
Cool sequential module box. Aftermarket mod October 12, 2017

Reviewer: Random Dude D00D!

 
Haven't installed the module box on my car yet but I like the operation of it. Easy to wire and the sequential mode is nice

Was this review helpful to you?

  0 of 0 people found this product review helpful:
 
4-step chase flash module box was what I needed July 25, 2017

Reviewer: Marketplace Customer

 
bought these sequential chase flash module boxes a little while back, planned to 3d print holders for 5050 led strips 24 leds per light, hooked them up to find only 2 worked. Hooked up the other on to rule out problems, and again only 2 worked. Did some rewiring and flipped some leads and bam all was well. These sequential flashing module boxes are perfect for what I wanted. They work with an led dimmer also. So, if you purchase these and have a problem, check and recheck your work!

Was this review helpful to you?