Add The Load Resistors For LED Corner Lights to preventing rapid blinking

You can find the 50W 6Ohm Load Resistors under 50W 6Ohm Load Resistors for LED Turn Signal Corner Lights or LED License Plate Lights

Step 1: Get a pair of at least 10ohm or higher 30ohm resistors (silver metal showing in the picture) and a pair of T-Tap Connectors (red ones showing in the picture), you can easily find them from local electronics store such as Radio Shack, Fry's, etc

Step 2: Use the T-Tap connectors to connect the resistor's two side wires.

Step 3: Find the wires that connect to the LED corner lights

Step 4: Connect the resistor parallel to the two wires from the LED corner lights using the T-Tap

Final: Put back the LED bulbs to the corner light housings and enjoy your new LED corner lights.