Q: How do I install this product?

A: You need to first open up your BMW headlight housings in order to install this RGB LED Angel Eyes Halo Rings. You can check this BMW headlight removal for how to open the housing. We recommend professional installation for this product unless you are familiar with the BMW headlights.

Q: Where do I tap the power?

A: Please tap the power to the stock side marker lights or turn signal lights

Q: When I have the wires hook up, the Rings only light up green or not light up at all?

A: Please refer to the Common troubleshooting for this RGB BMW Angel Eyes Ring set here.

Q: Can I use the remote control inside my car?

A: Since this product is using the IR (Inferred) wireless remote, therefore we recommend you place the IR receiver near the front BMW kidney grille so you can stand in front of the car using the remote control.

Q: Can I put the IR receiver near the window or inside the car so I can control it there?

A: Yes, you can but you will need to extend some wires yourself.

Q: Can the RGB rings stay at a solid color without flash?

A: Yes, you can set the rings to stay at any of the 7 colors without flashing.

Q: How come the white color of this RGB rings looks kind of weird?

A: For the RGB rings, the white color is mixed with Red + Green + Blue, therefore it is not exact "White" like a single color white LED look.

1) Visit Osram Sylvania Lamp Replacement Guide to find out the bulb part number you need for your vehicle.

If you are not sure how to use the Osram Sylvania Lamp Replacement Guide, you can check the tutorial.

2) Once you obtaint the bulb size:

a) Select the bulb size from the dropdown list.

b) Use the search bar above..