 |
 |
 |
 |
Features
-
(1) brilliant red 912 906 908 920 921 926 T15
LED replacement bulb
-
Powered by 10 pieces of high powered SMD LED
diodes
-
Special strobe/flashing design; continuous cycle of three strobes and pause while brakes are applied
-
Great as an upgrade from stock brake lights
for brighter output and special strobe function
- See more product details
Frequently Asked Questions
Q: Which original bulb does this LED replace?
A: This LED bulb will replace the original bulb size 901 904 906 912 920 921 W16W, etc as shown below:
|
Q: Can I use these LED bulbs other than backup reverse lights?
A: No! These CREE High Power T15 LED bulbs are specially designed exclusively for backup reverse lights ONLY.
We have designed this kind of LED with a large enough wattage so they will light up much brighter for a reverse light purpose and successfully pass most European cars' on board computer check. Because of this, these LED bulbs will overheat if it is constantly lighting up.
So please do not use these LED bulbs for parking lights, license plate lights nor driving daytime lights; any improper use of this LED bulbs will cause the LED
to burn out and void the replacement warranty.
|
Q: Where can I find the
installation guides for this product?
A: We have a large selections
of installation guides with pictures and videos on our
Tech Support page and you can
search to find the specific installation guide you need.
|
Q: This red LED brake light bulb is longer than my stock brake light bulb. Will it still fit?
A: Yes. While it measures about 1.5 inches (38mm), the strobing LED 3rd brake light bulb will still fit in your cargo light housing. We've tested fitment on many different trucks including Ford, GMC, and Dodge to confirm that the LED brake lamp bulb will fit.
If you've attempted to plug in the red LED bulb back but were unable to, it is because the wiring is too short.
One workaround to this is to unplug the reverse light bulb socket on the side, which will give your LED brake light bulb clearance to be plugged in.
|
General Question: How to find bulb
size and shop?
1) Visit Osram Sylvania Lamp Replacement Guide to find out the
bulb part number you need for your vehicle.
If you are not sure how to use the Osram Sylvania Lamp Replacement
Guide, you can check the
tutorial.
2) Once you obtain the bulb
size:
a) Select the bulb
size from the
dropdown list.
b) Use the search bar
above..
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Additional Information
To make your pick up truck a truly special and
one of a kind vehicle, start by strobing your high mounted brake light!
This page features a single brilliant red strobe LED third brake light
replacement bulb. Sized to fit 912, 906, 908, 920, 921, 926, and T15 light
sockets, the strobe/flash LED brake light bulb is made to fit many trucks
such as Nissan, Toyota, Chevrolet, GMC, Ford, and Dodge.
Each strobing LED brake light bulb is made up of (10) pieces of high powered
SMD LED emitters to create a brilliant shine that drivers behind you cannot
miss. The flashing feature is activated by applying your brakes, creating a short strobe and pause cycle until you release your brakes.
The strobe effect will last a few seconds. The flashing red LED 3rd brake
light bulb is ideal for upgrading your brightness output from your truck's
factory brake light. Strobing your 3rd brake light will ensure that drivers
behind you know you're braking. Brake in style and make your pick up truck
one of a kind!
 For more pictures, please click the "Gallery Picture" Tab above
Warranty Terms and Conditions
|
|
 |
 |
 |
 |
|
 |

|