Bulb Size Finder
(M-F 9AM-6PM PST)
This page features one pair upgraded error free 10-SMD-2835 PWY24W PW24W replacement LED bulbs for the following cars listed above.
This newly upgrade design will directly replace the stock PWY24W PW24W halogen bulb, simply plug and play.
1 pair CAN-bus error free 10-SMD-2835 PW24W LED bulbs.
For more pictures, please click the "Gallery Picture" Tab above
Warranty Terms and Conditions
Clear and Clean front end look without the ugly "fried egg"
Frequently Asked Questions
Q: What's CAN-bus Error Free LED bulbs?
A: CAN-bus is also written as canbus, is a type of circuit board chips use to communicate with the vehicle's on board computer. This class of LED bulbs
have either built-in CAN-bus use load resistors or higher wattage so they can pass most European vehicles' on board computer check (without triggering error or bulb out warming on
Q: Do CAN-bus Error Free LED bulbs guarantee to work for any European cars?
A: No, The CAN-bus Error Free LED bulbs do not guarantee to work for all European vehicles. You can think this like Tylenol. It works for most people
to cure their headache, but might not work for everybody. Even for the this same person, it might not work every time. Please always contact us or check the known compatible vehicle list
to ensure the fitment before buying.
The known compatible vehicle list is created base on our long testing to ensure their correct fitment and no-error functioning.
Q: How to install the CAN-bus Error Free LED bulbs
A: Please install the CAN-bus Error Free LED bulbs follow these steps:
1) Always make sure the car is off, key is out and all the lights are off before the installation (otherwise, the on board computer will record the error when you remove the stock bulb)
2) Install the LED bulbs
3) After that, keep the engine off and turn on the light to see whether the LED bulb lights up
4) If the LED bulbs lights up, put the LED light back to the housings and start the engine to see check see whether there's any error message on dashboard
A) If there is no any error message, well done
B) If there is an error message, please turn off the engine, lock the car and wait about 10 sec to start the car and check again
C) You might need to turn your car off and on for a 3rd time because sometimes it takes twice to have the on board computer reset itself
5) If the LED bulbs don't light up, turn off the light and car, turn the LED bulb 180 degrees and repeat from step 3)
Q: How come the LED bulb flickers/strobes couple times when I just start the engine?
A: This symptom is completely normal. When installing any LED bulb for an European cars such as Audi, BMW, Mercedes-Benz,
Porsche, Volkswagen, etc. This temporarily flickering is caused by European cars' on board computer sending a routine check electrical impulse when first start the engine to all the bulbs
and lamps to make sure they are not burnt out. Since LED bulb is super sensitive to power, so it will cause the LED bulb to respond and light up.
1) Visit Osram Sylvania Lamp Replacement Guide to find
out the bulb part number you need for your vehicle.
If you are not sure how to use the Osram Sylvania Lamp Replacement Guide, you can check the
2) Once you obtain the bulb size:
a) Select the bulb size from the
b) Use the search bar
2012-up Audi A3
2012-up Audi A4 facelift model
2012-up Audi A5 facelift model
2011-up Audi Q3
2013-up Ford Fusion (US model only)2013-up Mercedes-Benz GLK (LCI)
2013-up Volkswagen MK7 Golf (halogen headlights trim only)
2013-up Volkswagen CC
2014-up Volvo S60
2014-up Volvo XC60
2012-up BMW F30 3 Series (daytime running lights for halogen headlights only)
2014-up BMW i3
2013-up Citroën C4
2012-up Peugeot 208
2013-up Skoda Octavia III
Write a review and enter a chance to win a HID conversion kit... Be the first to review this product!
For exclusive deals and offers, sign up for our newsletter: