 |
 |
 |
 |
Compatibility
- 2008-2013 Lexus IS-F
- 2008-2013 Lexus IS with F Sport bumper
- 2006-up Lexus GS
- 2007-up Lexus LS
- 2015-up Lexus RC
- 2012-up Lexus RX facelift
Features
- Black matte finish
- Made with high quality T6061 Aluminum
- Special powder coated rather than black painted
- Easy installation
- No drill or modification required
- Screw in from the tow area / hole
- 8 mounting holes to ensure plate will not block the parking sensor or light
- Angle adjustment for plates to follow the curve of the bumper
- Content: one set
- Color: black matte finish
- See more product details
Note
- Please always check the Product
Compatibility List in the Product Description to make sure your vehicle is
listed.
- You will also need to verify if your OEM
tow hook matches the picture of the compatible tow hook shown in the product
listing. Make sure the threading pattern is the same, regardless of tow bar
color.
- The tow bar is designed to fit a number of
vehicles so the space between the bumper and the support bracket may vary
slightly according to your car.
- This extra space will give you appropriate
hand-space to fully mount the license plate onto the support bracket to make
the installation easier.
- If the tow hook socket/eye and the front
parking sensor's distance is less than 5" apart, the license plate mounting
bracket might trigger the sensor.
- Check out the tow hook license plate adapter for 2006-up Lexus
IS and 2011-up Lexus CT
Installation
Frequently Asked Questions
Q: What makes this Tow Hook Mounting Adapter unique?
A: For starters, there's no modification required. You will be utilizing the tow area/tow hole so there is no drilling or cutting involved.
Because these Tow Hook Mounting Adapters are vehicle specific, each bracket comes with 8 mounting holes so that there is no blockage of the intake vents or
lights. Each mounting hole is follows a curvature so that you can adjust the angle of your license plates to follow the curve of your bumper.
|
Q: How do I know if this tow hook will fit my car?
A: Please always check the Product Compatibility List in the Product Description to make sure your vehicle is listed.
You will also need to verify if your OEM tow hook matches the picture of the compatible tow hook shown in the product listing. Make sure the threading pattern is the same, regardless of tow bar color.
|
Q: How do I install this Front Bumper Tow Hook Mounting Adapter on my car?
A: Take a look at the front bumper. There should be a cover for the tow hook.
Step 1: Use a flat head screw driver to pop off the cover. Be careful! You don't want to accidentally scratch the paint.
Step 2: Twist the screw included with the bracket in tightly to the tow hook.
Step 3: Screw in the license plate tightly with the bracket.
Check out this video installation for step-by-step directions:
|
Q: Where can I find the tow hook license plate mount installation guide?
A: You can print out a copy of the
tow hole license plate
mount
PDF to aid you in installing this kit.
|
Q: How can I prevent the tow hook license plate mount from spinning?
A: First, make sure to install
the components in the correct order:
Screw --> Flat Washer --> Mounting plate --> Locking/tooth Washer
--> Tow Bar (this new design was updated since 2017-09)
If you want to further secure the tow hook license plate, you can get some Loctite Threadlocker tool from Walmart. Just search "Loctite Blue".
|
Q: Will the license plate tow hole adapter bracket block my parking sensors?
A: The license plate tow hole adapter is made with 8 different locations you can choose from to mount the plate in order to avoid any parking
sensors.
|
Q: How can I install my tow hook license plate mount to minimize any gaps between the bracket and my vehicle?
A: iJDMTOY's tow hook license plate adapter is designed to accommodate all
trims for a particular vehicle as well as customer's preference on how they want to mount the bracket. Each bracket has 8 different curved mounting locations so that the bracket can be
positioned accordingly to the design of the vehicle as well as angle adjusted for personal preference.
Most customers choose to mount the tow hook license plate adapter bracket at the center location. This is the most popular look, with a smaller gap towards the inner part of the car
and a wider gap at the outer side. You can even adjust the angle of the license plate bracket before you secure it in place.

If you prefer a more flush look, the outer left hand mounting positions allow the bracket to sit closer to the bumper.

Since this bracket is designed to fit different vehicle trims and options, you may need to bypass the parking sensor. If this is the case, the positions on the right hand side are also
a viable option. If you feel that there is too much gap between the edge of the vehicle and the bracket, you can also adjust the angle of the bracket as well.
Check out this YouTube demo that shows you all the possible scenarios you can install your no drill license plate mount.
|
|
|
 |
 |
 |
 |
|
 |

|