Q: How do I install these Honda Civic LED rear reflectors?
A: To install these Honda Civic LED rear reflectors, you will need to remove the stock red reflector. It's not necessary to remove the black bezel
entirely
, but there is a secondary piece behind the outer bezel that you will need to maneuver out of the way later on in the installation.
Take a pry tool or flathead and pop out the stock reflector.


Directly replace with the Honda Civic LED rear reflector assembly. There is a secondary piece behind the outer bezel that you will need to pry open a
little in order to get the wiring threaded through inside of the vehicle. First thread the wiring into the center hole in the outer black bezel and then through the interior cover as
well. Then pop in the Honda Civic LED rear reflector lights. There's no clips, so you need to pop in the new LED reflector in firmly to attach.
After the Honda Civic LED rear reflector is firmly attached, then you can connect the wiring to power up the LED assembly.