California residents click here for Proposition 65 Warning

Home > Universal Fit Products > License Plate Bracket & Mounting Hardware >

No Drill Front Bumper Tow Hole Adapter License Plate Mounting Bracket For 2014-up Mazda3 Mazda6, 2013-up Mazda CX-5, 2016-up Mazda MX-5

No Hole Tow Hook License Plate Mount For Mazda3 Mazda6 CX5

Price: $23.99

Stock:In Stock

Status: Usually Ships in 24 Hours

SKU: AA2281

Accessories:

I Love JDM License Plate Frame (AA2003) * [Add $2.50]

Qty:

Details

FAQ/Install

Compatibility

2014-up Mazda3
2014-up Mazda6
2013-up Mazda CX-5
2016-up Mazda MX-5 Miata

Features

No drill or modification required! Directly screw into original tow hole to mount the license plate instead of drilling holes into your front bumper
Unlike "copycats" on the market, our license mounting plate is made of black powder coated steel instead of aluminum; much stronger, more durable and better prevents the license plate from spinning due to high-speed driving
Also come with 8 different mounting locations to best keep the plate from blocking intake vents / lights / parking sensors with angle adjustment for plates to follow the curve of the bumper
See more product details

Notes

Check the product compatibility list in the product description to make sure your vehicle is listed
Verify if your OEM tow hook matches the picture of the compatible tow hook shown in the product listing
Make sure the threading pattern is the same, regardless of tow bar color
The tow bar is designed to fit a number of vehicles so the space between the bumper and the support bracket may vary slightly according to your car
This space will give you the hand-space needed to fully mount the license plate onto the support bracket to make the installation easier
If the tow hook socket/eye and the front parking sensor's distance is less than 5" apart, the license plate mounting bracket may trigger the sensor

Installation

How to Install License Plate Tow Hole Mounting Adapter Bracket

Tow Hole License Plate Relocator

no drilling tow hook license plate holder

Tow Hole License Plate Relocator

no drilling tow hook license plate holder

Frequently Asked Questions

Q: What makes this Tow Hook Mounting Adapter unique?

A: For starters, there's no modification required. You will be utilizing the tow area/tow hole so there is no drilling or cutting involved.

Because these Tow Hook Mounting Adapters are vehicle specific, each bracket comes with 8 mounting holes so that there is no blockage of the intake vents or lights. Each mounting hole is follows a curvature so that you can adjust the angle of your license plates to follow the curve of your bumper.

Q: How do I install this Front Bumper Tow Hook Mounting Adapter on my car?

A: Take a look at the front bumper. There should be a cover for the tow hook.

Step 1: Use a flat head screw driver to pop off the cover. Be careful! You don't want to accidentally scratch the paint.

Step 2: Twist the screw included with the bracket in tightly to the tow hook.

Step 3: Screw in the license plate tightly with the bracket.

Check out this video installation for step-by-step directions:

Q: Where can I find the tow hook license plate mount installation guide?

A: You can print out a copy of the tow hole license plate mount PDF to aid you in installing this kit.

Q: How can I prevent the tow hook license plate mount from spinning?

A: First, make sure to install the components in the correct order:

Screw --> Flat Washer --> Mounting plate --> Locking/tooth Washer --> Tow Bar (this new design was updated since 2017-09)

tow hook order large

If you want to further secure the tow hook license plate, you can get some Loctite Threadlocker tool from Walmart. Just search "Loctite Blue".

Q: Will the license plate tow hole adapter bracket block my parking sensors?

A: The license plate tow hole adapter is made with 8 different locations you can choose from to mount the plate in order to avoid any parking sensors.

Q: How can I install my tow hook license plate mount to minimize any gaps between the bracket and my vehicle?

A: iJDMTOY's tow hook license plate adapter is designed to accommodate all trims for a particular vehicle as well as customer's preference on how they want to mount the bracket. Each bracket has 8 different curved mounting locations so that the bracket can be positioned accordingly to the design of the vehicle as well as angle adjusted for personal preference.

Most customers choose to mount the tow hook license plate adapter bracket at the center location. This is the most popular look, with a smaller gap towards the inner part of the car and a wider gap at the outer side. You can even adjust the angle of the license plate bracket before you secure it in place.

Tow Hook License Plate Adapter Location 01

If you prefer a more flush look, the outer left hand mounting positions allow the bracket to sit closer to the bumper.

Tow Hook License Plate Adapter Location 03

Since this bracket is designed to fit different vehicle trims and options, you may need to bypass the parking sensor. If this is the case, the positions on the right hand side are also a viable option. If you feel that there is too much gap between the edge of the vehicle and the bracket, you can also adjust the angle of the bracket as well.

Tow Hook License Plate Adapter Location 04

Check out this YouTube demo that shows you all the possible scenarios you can install your no drill license plate mount.

Additional Information

This page features the no drilling required front bumper tow hook license plate relocation kit for the:

2014-up Mazda3
2014-up Mazda6
2013-up Mazda CX-5
2016-up Mazda MX-5 Miata

You can directly bolt on this bracket/adapter to your vehicle's front bumper tow hole and mount your license plate there instead of drilling and damaging your vehicle's front bumper.

Unlike the "copycats" on the market, our iJDMTOY license plate mounting bracket is made of black powder-coated steel instead of aluminum which is much stronger, more durable, and better prevents the license plate from spinning due to high-speed driving. The mounting bracket also comes with 8 different mounting locations to best keep the plate from blocking the intake vents / lights / parking sensors and angle adjustment slots on the plate to better follow the curve of the bumper during the installation.

For more pictures, please click the "Gallery Picture" Tab above

Warranty Terms and Conditions

Write a review to win a HID conversion kit

Average Customer Review:

5 of 5 Total Reviews: 11 Write a review.

1 of 1 people found this product review helpful:

Tow hole license mount for 2018 Mazda 6.	July 29, 2018
Reviewer: Nick

Since I could not find any reviews for a 2018 models, I decided to write one. Fits like a glove on my 2018 Mazda 6.

Was this review helpful to you?

0 of 0 people found this product review helpful:

My license plate looks better than I thought	July 25, 2018
Reviewer: Wilson

I was able to work with customer service to get the right length tow hook adapter for my Mazda CX-5 and now the license plate fits perfectly the way I had originally imagined it would on the front bumper of my car. It even looks better than I thought it would too.

Was this review helpful to you?

3 of 3 people found this product review helpful:

Best looking license plate among all other Mazdas	May 18, 2018
Reviewer: Tera Fenzke

The JDM style license plate relocating mount does stick out a little awkwardly from the right most side of my Mazda6 but not much you can do about that given the shape of the grill. My license plate bracket had too much give the first time I put it on and kept tilting after driving. I took the license plate bracket off and replaced the washer that came with the kit with 2 larger/sturdier ones and really cranked the allen wrench. Doesn't move at all now!

Was this review helpful to you?

0 of 0 people found this product review helpful:

license plate relocator looks nice works great	April 12, 2018
Reviewer: tj tryba

Picked this JDM style license plate relocation kit up for my buddy for his birthday after getting a warning about no front license plate on his Mazda MX-5 Miata. So I picked this up for him and he loved the ability to pick the how the plate would mount with the holes on the back of the bracket. But for anyone wondering yesterday this fits a 2016 Mazda Miata

Was this review helpful to you?

0 of 0 people found this product review helpful:

Love how well the JDM license offset fits!	April 5, 2018
Reviewer: paul david cassady

The front bumper license plate relocator fits my 2015 Mazda 3 shockingly well. The main stud appears to be anodized aluminum. You will need a 17mm box end wrench. I would not suggest an adjustable as you run a risk of rounding the hex off. Do yourself a favor and coat the threads with anti seize compound. You will also need a 10mm for the plate nuts.

Was this review helpful to you?

View All Customer Reviews

No Drill Front Bumper Tow Hole Adapter License Plate Mounting Bracket For 2014-up Mazda3 Mazda6, 2013-up Mazda CX-5, 2016-up Mazda MX-5

My Account

Useful Info

Products

Questions

EZ Buying Guide

Contact Us