180-LED RGB Multi-Color LED Angel Eyes Halo Rings For 2008-2014 Dodge Challenger w/ Wireless Remote Control
Free Shipping Within 24 Hours.
- Made with high quality 3-Emitter 5050 RGB SMD LED lights and 4 pieces RGB LED halo rings for headlamp and the turn signal lamp housings
- Powered by total 180 pieces 5050-SMD RGB LED lights with Red/Green/Blue/Amber/Magenta/Cyan/White
- For 2008-2014 Dodge Challenger (good for both HID or halogen headlights)
- Come with an actual wireless remote control that allows you to control color/flash pattern from anywhere/directions within 60 feet so that you don't have to directly point at the receiver to change the modes anymore
This page features one set 180-SMD RGB Multi-Color LED Angel Eyes Kit with RF wireless remote control for 2008-2014 Dodge Challenger before the facelift.
This RGB LED angel eye kit will convert both the headlamp and the turn signal lamp housings to LED halo rings.
Note: Installing this item will heavily involve modifications on your part. Retrofitting actions may include, but not limited to, baking open the headlamps, cutting, drilling, and adding additional brackets to mount the LED rings. Because use of adhesives such as glue and double sided tape is required to install this product, there is no return or exchange once installed. We highly recommend getting this professionally installed, which may cost an additional fee.
To power up the module box, connect the red wire to a 12V power source (+). Connect the black wire to a ground connection. Make sure you do not mix these two wires up; connecting the two wires incorrectly (e.g. tapping the black wire to a positive connection and the red wire to a ground) may result in permanently damaging the module box.
Please visit Headlight LED angel eye FAQ/tech support for more detail.