v2. RGB Multi-Color 96-LED Angel Eye Halo Rings w/ Lens Covers and Wireless Remote Control For BMW E36 E46 E38 E39 3 5 7 Series
Free Shipping Within 24 Hours.
- Fits: BMW E36 E46 3 Series, E39 5 Series and E38 7 Series
- 4 pieces 131mm (5.15 inches) LED Rings, in total 96 pieces RGB SMD LED lights with 7 colors including Red/Green/Blue/Amber/Magenta/Cyan/White
- Come with acrylic ring cover over the LED circuit board to make the halo ring looks more OEM and professional!
- Unlike the imitation ones on the market, our iJDMTOY RGB rings come with an actual wireless remote control that allows you to control color/flash pattern from anywhere within 60 feet. This means that you don't have to directly point at the receiver to change the modes anymore
This page features one set 96-SMD RGB Multi-Color LED Angel Eyes Kit with Remote Control for the BMW vehicles listed below:
1992-1998 BMW E36 3 Series with Euro headlights
1995-2001 BMW E38 7 Series
1997-2003 BMW E39 5 Series
2000-2003 BMW E46 3 Series Coupe (before facelift)
1999-2004 BMW E46 3 Series Sedan or Wagon with factory equipped HID xenon headlights
2001-2006 BMW E46 M3
This is the new Version 2 of the extremely popular BMW RGB LED halo rings with an all new cover on top of the rings so you cannot see the the individual LED emitters. This type of RGB LED halo ring is the first one of its kind in the industry.
It is 3-4 times brighter than conventional CCFL Angel Eyes rings and you can change up to 7 different colors for the LED rings and set the LED rings with four flashing patterns.
Unlike the imitation ones on the market, our iJDMTOY RGB rings come with an actual wireless remote control that allows you to control color/flash pattern from anywhere within 60 feet. This means that you don't have to directly point at the receiver to change the modes anymore.
Note: Installing this item will heavily involve modifications on your part. Retrofitting actions may include, but not limited to, baking open the headlamps, cutting, drilling, and adding additional brackets to mount the LED rings. We highly recommend getting this professionally installed, which may cost an additional fee.
To power up the module box, connect the red wire to a 12V power source (+). Connect the black wire to a ground connection. Make sure you do not mix these two wires up; connecting the two wires incorrectly (e.g. tapping the black wire to a positive connection and the red wire to a ground) may result in permanently damaging the module box.
Please visit Headlight LED angel eye FAQ/tech support for more detail.