No Hyper Flash 24W High Power Amber 7440 W21W T20 LED Replacement Bulbs For Car Front or Rear Turn Signal Lights (No Load Resistor Required)


Free Shipping Within 24 Hours.
$34.99
SKU 20-095-Amber
  • Exclusively designed, US patent pending front/rear LED turn signal light bulbs, plug-and-play installation without adding load resistors and no hyper flash problem
  • ONLY good for front or rear AO (Amber-Off-Amber-Off) type turn signal light use
  • Powered by 44 pieces of 0.5W Amber LED chipsets with a gorgeous amber glow, true 24W output, just like OEM 7440 W21W incandescent bulb, but with 3x brighter lighting output (approx 1000 lumen)
  • Special Note: You can only use it for front/rear turn signal not for constantly light up as driving/parking or DRL lights

This page features the pair of 24W high powered amber LED replacement bulbs to work as turn signal lights!

The LED turn signal replacement bulbs feature a no hyper flash design without external load resistors. This makes for a simple plug and play installation process, a simple item to work with without the clutter of a load resistor. Each LED turn signal light bulb is powered by (44) 0.5W amber LED diodes to create a gorgeous amber glow that is three times brighter than incandescent light bulbs (approx. 1000 lumen).

The exclusively designed LED turn signal replacement light bulbs are 7440, W21W, or T20 sized and are made to fit the front or rear single filament socket AO (amber-off-amber-off) turn signal housing. These are NOT made for constantly light up driving/parking or DRL lights use.

Please visit Indicator light LED bulbs FAQ/tech support for more detail.

Questions & Answers

Ask a Question

2014 Lexus IS350 Fsport. There's no hyper flash, no resistors just straight plug and play and they work for both front/rear turn signals replacing the stock bulbs, simple plug and play?

There is no hyper-flash, but you can only install it either the front or rear turn signal. It cannot be installed on both sides. The exclusively designed LED turn signal replacement light bulbs are 7440, W21W, or T20 sized and are made to fit the front or rear single filament socket. These are NOT made for constantly light up driving/parking or DRL lights use.
 

I have a 2005 Lexus SC430, will this fit in the stock housing?

According to Osram Sylvania, it shows your vehicle uses a 7440 for the front turn signals. However, please physically check your bulb size in your vehicle because Osram Sylvania is not always 100% accurate.

If your vehicle does use a 7440, these LEDs should fit into the socket. Please check with your OEM bulb and/or owners manual to confirm.

I have a 2016 Lexus NX200t will this fit ?

These LED bulbs replace OEM 7440 bulbs. To confirm fitment, please check with your OEM bulb and/or owners manual.

Will these fit 2017 F-150?

According to Osram Sylvania, the 2017 Ford F-150 does not use bulb size 7440 for the turn signal applications so it will not fit. However, to further confirm, you can always check your stock bulbs for the bulb size.

Hi, for a mazda 3 2014 i touring model, can all 4 turn signals be converted to led with this bulb? I believe there is another bulb sold here that can only be installed for either front or rear turn signals only to avoid hyper flash. I will ask for your recommendation to replace both front and rear turn signals. Thank you.

If you are looking to install LED lights in all 4 turn signals, you will need to install load resistors for the front or rear. The bulbs with built-in resistors will not work properly if you change all 4 sides.

Are this lights fixed the Toyota RAV4 2017 front turn signals.? 7444NA

These LED bulbs will work on any vehicle as long as the bulb size that is being replaced is 7440 (single filament). It is not compatible with the 7444 socket (dual filament).