18-SMD Error Free OEM-Fit 3W Full LED License Plate Light Kit For Chevrolet Camaro Corvette SS Equinox Impala Volt, Cadillac ATS CTS SRX XTS ELR


Free Shipping Within 24 Hours.
$19.99
SKU 75-114
  • Fit 2011-2013 Chevrolet Camaro, 2014-up Chevrolet Corvette, 2014-up Chevrolet SS, 2017-up Chevy Volt, 2013-up Cadillac ATS, 2011-up Cadillac CTS, 2013-up Cadillac XTS, etc (For detail years/fitments, please check the description below)
  • One pair (left/right sides) full LED assemblies, powered by 18 pieces super bright xenon white LED diodes with CAN-bus error free decoders (Replace OEM part # GM13502179)
  • Directly replace the factory original license plate lamp housing/lens and the 168 194 or 6418 C5W light bulb inside
  • These all new super bright 3-watt high power LED license plate light assy are at least 3 times brighter than the factory ones, will give your car a modern and luxurious appearance with enhanced safety at night

For the ultimate shine on your Chevy's license plate tag, look to the xenon white CAN-bus LED license plate lights assy!

Each LED license tag lamp is powered by (18) 3528-SMD LED chipsets for a super bright output and an incredible shine on your license plate, and has a built-in CANbus controller to prevent error messages. Directly replace your original incandescent license plate light with the LED license plate light assy for a straightforward and simple installation process.

The xenon white CANbus LED license plate light assembly is made to fit

2014-up Chevrolet Corvette
2014-up Chevrolet SS
2011-2013 Chevrolet Camaro
2010-2017 Chevrolet Equinox
2014-up Chevrolet Impala
2012-up Chevrolet Sonic
2013-2017 Chevrolet Traverse
2015-up Chevrolet Trax
2017-up Chevy Volt

2013-up Cadillac ATS
2011-up Cadillac CTS
2010-2016 Cadillac SRX
2013-up Cadillac XTS
2014-2016 Cadillac ELR

2010-2015 Buick Allure
2013-up Buick Encore
2016-up Buick Envision
2010-up Buick LaCrosse
2012-up Buick Verano

2017-up GMC Acadia
2010-up GMC Terrain

Questions & Answers

Ask a Question

How do I install this product on a 2014 Cadillac ATS

You would pop the aftermarket LED license plate lights into the opening the same way you would install the stock lamps. There will be a small resistor which plugs right into the LED lamp, and then you would connect the adapter on the light to where the stock license plate light bulb used to be inserted.

Check out these general installation guides: https://store.ijdmtoy.com/pages/oem-replacement-led-license-plate-light-general-installation-guide

I just purchased these for caddy 2016 cts. Need install info on the wiring. This was supposed to be an plug and play.

To install this item, you need to remove the stock license plate lamp and remove the stock bulb out of the socket. Then, you connect the T10 adapter on our product to where the bulb used to be. The resistor should be tucked away, preferably put onto something metal and then you place the aftermarket LED lamp where the stock lamp used to be. To ensure fitment, please check to see if your stock lamp matches the one checked in green: https://cdn.shopify.com/s/files/1/0048/8629/8727/products/132298990741-1_1000_448x480.jpg?v=1556324215

Customer Reviews

Based on 4 reviews Write a review