Navigation  

Final Sale Clearance





iJDMTOY Easy Shopping Guide

iJDMTOY Daily Deal

LED Headlights

HID Conversion Kit

LED Daytime Running Lights

LED Bulbs Special Price

LED License Plate Lights

LED Knight Rider Lights

BMW E92 LED Angel Eyes


 


Home
> Universal Fit Products > Adapters and Wiring Harness >


3-pin 12V Electronic LED Flasher Relay Fix for LED Turn Signal, Blinker Corner Light Bulbs (CF-13)

12V Electronic LED Flasher Relay Fix Turn Signal




 



Price: $8.99


Stock:In Stock


Status:
Usually Ships in 24 Hours

SKU:
AA1184



Optional:
CF14 Conversion Wire (AA1094) [Add $2.99]

Qty:
Description FAQ
 
Known Compatible Vehicle List

Features

  • Part Number: CF13JL-02
  • 3-pin configuration for many Japanese vehicles
  • Simply plug and play with no tapping wire, modification required
  • Solve most LED bulbs related turn signal light problems such as hyper flash, no flash nor bulb out warning message on dashboard
  • No heat vs load resistors; one flasher can resolve both the front and back LED turn signal bulbs issues
  • Replace the stock flasher located near or underneath steering wheel
  • Content: 1 piece CF13JL-02 flasher (also works for CF14 socket with option)
  • See more product details

Installation

Note

  • The LED flasher does not replace all flasher relay. Before ordering, please make sure the 3-pin configuration is the same as your vehicle's. You can usually find your flasher pin out printed right on your flasher. Failure to check this and installation in an incompatible vehicle can blow your fuse, destroy the flasher and void the flasher warranty

 LED Relay Fix LED Turn Signal Corner Light

 LED Relay Fix LED Turn Signal Corner Light

 LED Relay Fix LED Turn Signal Corner Light

 LED Relay Fix LED Turn Signal Corner Light

Additional Information

The LED flasher does not replace all flasher relay. Before ordering, please make sure the 3-pin configuration is the same as your vehicle's. You can usually find your flasher pin out printed right on your flasher. Failure to check this and installation in an incompatible vehicle can blow your fuse, destroy the flasher and void the flasher warranty


For more pictures, please click the "Gallery Picture" Tab above

Warranty Terms and Conditions

Write a review to win a HID conversion kit

Average Customer Review:

5 of 5
Total Reviews: 4 Write a review.


  0 of 0 people found this product review helpful:
 
electronic flasher relay fixed my turn signals! March 15, 2017

Reviewer: Renars

 
The flasher relay fix eliminates hyperflashing turn signals with LED bulbs. Easier than soldering wires.

Was this review helpful to you?

  0 of 0 people found this product review helpful:
 
Cured Hyper flashing March 2, 2017

Reviewer: Eternal

 
Use this relay to cure hyper flashing in LED switch back lights. In my car it does click an extra second after you make a turn but not a deal break.

Was this review helpful to you?

  0 of 0 people found this product review helpful:
 
Great way to fix the Fast Blink! February 28, 2017

Reviewer: Mike K

 
Worked as I expected! Many people doing LED lighting upgrades to their cars and trucks end up splicing in a load resistor to fool the factory blinker relay into thinking there is a normal incandescent bulb in there. You don't have to do no splicing into the electrical wiring in the car, you simply install a Electronic flasher in place of the normal one. Bit if info for you on the concept of the flasher relay: Original relays use a bi-metallic relay contact inside that when a load (the light bulb) is on it causes the metal to heat up and in doing so it flexes causing the relay to either open or close depending on the type. When you install a LED bulb the power it requires is 1/8th of that of a incandescent bulb so the relay opens and closes very fast (I.E. the fast flashing turn signal). With a electronic flasher relay the time it takes to open/close the relay is controlled by a timer chip that is set at a specific time no matter what the load is on it, so hence the LED bulb will flash at a steady rate. Lastly those load resistors you buy and splice into the electrical wire basicly makes the relay see a normal load and it works, downside it that a LED bulb uses 1/8th the power then a normal bulb (this is a good thing) but by using that load resistor your then making the adding the low power LED + the resistor and your right back up to using the same about if not more power than you were using with the incandescent bulb. In short this is the best way to correct the fast blinking when upgrading to LED turn signals!

Was this review helpful to you?

  0 of 0 people found this product review helpful:
 
Five Stars February 23, 2017

Reviewer: Anonymous Person from United States

 
I made a custom harness with the LED flasher relay fix to fit my car AND IT WORKED. My LED turn signals aren't hyper flashing.

Was this review helpful to you?