Navigation  

Final Sale Clearance





iJDMTOY Easy Shopping Guide

iJDMTOY Daily Deal

LED Headlights

HID Conversion Kit

LED Daytime Running Lights

LED Bulbs Special Price

LED License Plate Lights

LED Knight Rider Lights

BMW E92 LED Angel Eyes

<<< Go Back

You can find the LED Roof Cab Lights here

This Roof Cab LED Light is a highly customizable universal fit product so you can install this set-up on practically any truck, SUV, or RV. If your vehicle does not already come with roof cab lights, you will need to drill holes in order to proceed with the wiring and mounting. This product comes with 5 cab roof LED lights, 10 screws, and 10 washers for a successful installation.
Before you begin, here are the supplies that you will need:

-2 Drill Bits, size 1/8" and 3/8"
-Ladder
-Screwdriver
-Some wiring (18-24 gauge)
-Electrical Tape
-Measuring Tape

This is what the package comes included with:

Install LED Roof Light 01

Step 1: There are many ways to power up this LED. You can add a switch or use the existing truck interior light switch. In this instance, we are using the truck's interior light switch to power up the LED roof lamps.

This installation will take the place of one of the front map lights, but you will still have access to the other existing map light.
Remove the entire front map light assembly, exposing the wires.

Install LED Roof Light 02

Install LED Roof Light 03

Install LED Roof Light 04


Step 2: Climb up to the roof of your truck. If your car already has an existing apparatus on the roof, such as a rack or an antenna like the Ford below, you don't need to remove these in order to install this LED roof light. You can just work your way around it.

ford-edge.jpg

Carefully measure where you are going to install each individual LED roof lamp. Use a dry erase marker to mark where the LED roof light will be placed and where you are going to drill the holes.

Install LED Roof Light 05

Install LED Roof Light 06

This is a general guideline for the measurements in inches, but you can position these LED roof lights however you like.

Install LED Roof Light 07


Step 3: You will need to screw in three holes: One on each of the ends for the front screw and rear screw, and one in the center for the wiring hole.

Install LED Roof Light 08


Step 4: Use your screwdriver to attach the screws at the front and rear to permanently mount your LED roof light.

Install LED Roof Light 09

Install LED Roof Light 10

Step 5: This is a general wiring guide to show you how to connect the positive and negative wire. Be sure to wire them up in parallel. Use the electrical tape for the connections so that they can maintain a parallel wiring.

Install LED Roof Light 11

Install LED Roof Light 12

The red circle is a guide to show you where the wiring connections go. All wires need to be routed through here to complete the wiring portion.

Install LED Roof Light 13

Test to make sure everything works and enjoy your new LED roof lights!

Install LED Roof Light 14

Install LED Roof Light 15

Install LED Roof Light 16