Navigation  

Final Sale Clearance





iJDMTOY Easy Shopping Guide

iJDMTOY Daily Deal

LED Headlights

HID Conversion Kit

LED Daytime Running Lights

LED Bulbs Special Price

LED License Plate Lights

LED Knight Rider Lights

BMW E92 LED Angel Eyes

<<< Go Back

Are the LED underbody kit or LED scanner light legal?

The LED underbody kits and the LED scanner knight rider bars are mainly used for off-road purpose. As long as you are not using it during driving, it is fine.

Back to Top

How do I mount the LED tubes for the LED underbody kit?

Our LED under body lights are typically mounted to the vehicle using zip-ties/cable ties by every 30 inches. It is not recommended to use just double-sided tape because road debris may cause the adhesive to fail, zip-ties/cable ties are a more durable and efficient way to mount the lights on the vehicle.

Back to Top

How much can I bend the LED tubes of the LED underbody kit?

Try not to bend the LED tubes of the LED underbody kit, it it meant to be stay straight or with just a little bit curve, do not bend it backwards or sidewards.

Back to Top

Is the LED tube/strip of the LED underbody kit and LED scanner knight rider bar waterproof?

Yes, the LED tube/strip is IP68 water resistance for all exterior use. However, the wiring and module boxes are not waterproof so they will have to be mounted somewhere secure and away from water. Since these items are installed on spots of the vehicle that can be subjected to water, they will have to be waterproof; this means that they can be subjected to rain and car washes, but submerging these lights in water is highly not recommended.

Back to Top

Can I use one remote to control multiple set of LED underbody kit?

Yes, it is possible to control multiple LED Under body lights with one remote. However, you would not be able to control them separately and independently from each other since they all use the same frequency for the module box and remote.

Back to Top

Can I use one remote to control multiple set of LED knight rider kit?

Yes, it is possible to control multiple LED Scanner Lights with one remote. However, you would not be able to control them separately and independently from each other since they all use the same frequency for the module box and remote.

Back to Top

What does the yellow wire do on the LED underbody kit module?

The yellow wire is optional and you can tap it to brake lamp's positive so when you brake, the LED will flash.

Back to Top

Can I mount the LED tubes or LED puddle lamps using 3M tape?

No, we do not recommend you use the 3M tape, because it will fall up sooner or later. For LED tubes/strips, we recommend you using the zip ties and for the LED puddle lamps, there are screws included in the package to mount each lamp.

Back to Top

How do I install?

You can find all the installation guide here.

Back to Top