Navigation  

Final Sale Clearance





iJDMTOY Easy Shopping Guide

iJDMTOY Daily Deal

LED Headlights

HID Conversion Kit

LED Daytime Running Lights

LED Bulbs Special Price

LED License Plate Lights

LED Knight Rider Lights

BMW E92 LED Angel Eyes

<<< Go Back

You can find these products under RGB LED Motorcycle Ground Effect Kit

Step 1: Before you get started, first connect all the pieces together and test to make sure everything works. Connect the red power wire to the positive terminal of the battery and connect the black ground wire to the negative terminal of the battery.

Once the wires are temporarily secured, power up the kit to ensure full functionality before installing it. If everything is in working order, turn the kit off and disconnect the power and ground wires from the battery to prepare for installation.

Install motorcycle LED strip 01

Step 2: Find the location(s) you would like to mount the LED strips. This can be any place you desire, as long as the location is appropriate. This means that the surface needs to be completely clean and free of dirt so the adhesive can fully adhere onto the surface. You may use a washcloth to remove any leftover debris.

Peel off the adhesive and secure the LED strip onto the surface.

Install motorcycle LED strip 02

Step 3: Route the wires to the motorcycle battery compartment and connect them to the module box.

Install motorcycle LED strip 03

Step 4: Connect red to battery positive and black to battery negative.

Install motorcycle LED strip 04