This is a tutorial that will show you how to install the Flush Mount LED Pods For Ford F150/F250 replace OEM fog lamps (70-217 70-282)
Step 1: Preassemble the LED pod lights with their U-shaped mounting brackets.
Step 2: Turn your wheel inwards to give yourself clearance to work.
Step 3: Remove the 4 screws circled in red in the picture below, 2 on the wheel well and 2 on the fender flare.
Step 4: Once the bolts are completely unscrewed, completely remove the fender flare off of the lower end of your Ford truck headlights.
Step 5: Separate your factory fog lamps from your fog light bezels.
Step 6: Place the flush mount LED pod lights into the Ford fog light bezels. (Shown below: 24W CREE high power LED fog lights)
Make sure the U-shaped mounting brackets' curved side is facing the bottom.
Step 7: Begin by optionally applying double-sided tape to the back of the unpainted stainless steel L-shaped bracket to serve as a cushion. This step is optional but can facilitate easier screw tightening later. Then, carefully slide the L-shaped stainless steel hinge into position, ensuring the screw hole is aligned with the opening in the LED pod light's U-shaped bracket.
Step 8: After ensuring the screw hole is aligned with the back opening of the U-shaped bracket, use the included screw and washer to securely fasten the LED pod light to the fog bezel.
Step 9: Test your LED fog lights to make sure they function properly on your Ford truck. Once you've confirmed that they do, put the vertical beam, air vent bezel, wheel well, and fender flare back into place to finish. You may now enjoy the high light output and flush appearance of your Ford F-150 or Super Duty's set of 24W LED fog lights!
Find this and more off-road truck LED lighting today!