Special LED Daytime Running Light Decoder Wiring Relay Kit for installing LED bulbs on high beam as DRL lamps


Free Shipping! Ship In 24 Hours.
$15.99
SKU AA1901
Size
  • Special DRL decoder wiring kit helps
    • Only one LED bulb lights up when both LED bulbs are installed.
    • LED bulbs both light up, but very dim.
    • Suitable for most Japanese cars such as Acura, Honda, Lexus, Toyota, Subaru, Mazda, Mitsubishi that equip with Daytime Running Light function.
  • Content: one piece decoder, one set splitter wiring harness
  • (R1) For 2001-2005 Lexus IS200 IS300, 1998-2005 Lexus GS300 GS400 GS430, 2003-2009 Lexus RX330 RX350 RX400h, etc
  • (R2) For 2007 and up Acura MDX RDX, 2009 and up Acura TSX TL ILX, 2006 and up Honda Accord Civic, 2009 and up Honda Pilot Insight CRZ, 1999-2006 BMW E46 3 Series, etc
  • (R3) 2007 or 2008 Acura TL and Acura TL Type-S
  • (R4) 2006-up Lexus IS250 IS350 IS-F, 2006-up Lexus GS300 GS350 GS460, 2002-up Lexus SC430, 2010-2011 Lexus RX350 RX450h, etc
  • (R5) 2009-up Toyota Matrix
  • (R6) 2008-up Mitsubishi Lancer or Evolution halogen headlight trim to enable low beam as DRL
  • (R7) 2006-2009 AP2 Honda S2000
  • (R8) 2012-up Subaru Impreza WRX STi Legacy, etc

Questions & Answers

Ask a Question

Will this work with Toyota Camry 2009, high beam/DRL. Or i have to get another one. Thank You.

For the 2009 Toyota Camry, we recommend going with the R4 setup.

Here is how we recommend installing the R4:https://store.ijdmtoy.com/pages/2010-up-lexus-rx350-9005-led-drl-daytime-running-light-bulb-install

Which harness is used for installing DRL fog light bezels on a 2017 subaru wrx?

You would need the R8 decoder for the 2012-up Subaru Impreza WRX STi Legacy, etc.

About your "Special LED Daytime Running Light Decoder Wiring Relay Kit for installing LED bulbs on high beam as DRL lamps", I have a Nissan Versa 2010 with 9003/H4 headlight bulbs, the high beam act as a DRL and I was looking at your R1 kit, do you have a similar kit that would connect to the H4 connectors? Thanks! Al.

Unfortunately, we do not have a decoder kit that would be compatible with your Nissan Versa. Our high beam DRL decoder kits all fit for the 9005 socket size.

Is this the correct kit I need to get my 2015 Mazda 3 sedan DRL/high beams both working?

If your 2015 Mazda 3 came with halogen headlights, you should opt with the R1 LED DRL decoder to allow 9005 LED high beam daytime running lights to work properly on both high beam mode and DRL mode.

Which decoder will work on my 2018 Mazda 3 Touring? It uses 9005 bulbs. With both LEDs in place, neither turn on in DRL mode, but the high beams work fine.

If your 2018 Mazda 3 came with halogen headlights, you should opt with the R1 LED DRL decoder.

Which kit will work with my 2011 toyota corolla drl/ high beam leds?

For the 2006-2016 Toyota Corolla, we recommend the R4 setup. Here is the installation guide: https://store.ijdmtoy.com/pages/2010-up-lexus-rx350-9005-led-drl-daytime-running-light-bulb-install

Hello: I want to install LED bulbs in the high beam lights on my Mazda 3 (in place of halogens). Apparently LED replacements do not function as DRLs in place of halogens. My understanding is the Mazda 3 gives the high beams about 7 volts to run them as dimmer DRLs (rather than using PWM as other cars do). Will the R1 allow the DRLs to function on the Mazda 3? Just curious, does the R1 up the voltage? And would the LEDs run at full brightness in this case? Thanks.

The LED DRL decoder setup allows LED high beam DRL bulbs to turn on to its full capacity on DRL mode and high beam mode. On the vehicle's DRL mode, it runs about 6~9V which is not enough to fully light up the LED bulb. Thus causes the LED lights to either flicker or not turn on at all on DRL mode. 

With this setup, the DRL brightness will be pretty much the same as high beam brightness. The R1 is suitable for the following Mazda:

2013-2016 Mazda CX-5 with halogen headlight trim only
2014-2018 Mazda 3 with halogen headlight trim only
2014-2018 Mazda 6 with halogen headlight trim only

my 2014 honda civic has drl I am switching my headlights out will this work for a 2014 civic?

For a 2014 Honda Civic, make sure to select the R2 decoder for your DRL/High Beams.

Would the R2 kit be the correct one to purchase for Mazda 3 2018 touring with halogen drl/highbeam setup?

We recommend the R1 for 2018 Mazda3 but with the halogen headlight trim only - doesn't work w/ HID headlight trim. The R1 decoder setup can be used for the vehicles below: 

2001-2005 Lexus IS200 IS300
1998-2005 Lexus GS300 GS400 GS430
2004-2009 Lexus RX330 RX350 RX400h
2001-2005 Lexus ES300 ES330
2004-2008 Toyota Solara
2004-2010 Toyota Sienna
2013-2016 Mazda CX-5 with halogen headlight trim only
2014-2018 Mazda 3 with halogen headlight trim only
2014-2018 Mazda 6 with halogen headlight trim only

Which type of wiring harness is necessary for 2012 Honda Ridgeline daytime running light leds?

If you're looking to upgrade your high beam DRL with 9005 LED lights, then it is recommended to select the R2 DRL Decoder kit specifically for your 2012 Honda Ridgeline.

Which kit do I need for 2016 Mazda CX-5?

If you have the halogen headlight trim, you would need the R1 DRL decoder for the high beam DRL.