Universal LED Daytime Running Light Automatic ON/OFF Controller Module Box Relay-iJDMTOY
Universal LED Daytime Running Light Automatic ON/OFF Controller Module Box Relay-iJDMTOY

Universal LED Daytime Running Light Automatic ON/OFF Controller Module Box Relay


Free Shipping Within 24 Hours.
$27.99
SKU AA1170
  • •Easily enable the LED daytime running lights' on and off with the car engine on and off
  • No need to find ACC in fuse box nor the annoying tap wire process
  • Work with most LED daytime running on the market •Wattage capacity: 12W
  • Delay turn on time: 5 sec •Delay turn off time: 15 sec •Size: 2.25" (L) x 1.75" (W) x 0.85" (D)

This page features one piece universal fit LED daytime running light automatic ON/OFF relay module box.

This automatic DRL On/Off rely module box allows you to easily install the LED daytime running lights and set it to turn on whenever the engine is on and turn off when the engine is off.

Features

Easily enable the LED daytime running lights' on and off with the car engine on and off
No need to find ACC in fuse box nor the annoying tap wire process
Work with most LED daytime running on the market
Wattage capacity: 12W
Delay turn on time: 5 sec
Delay turn off time: 15 sec
Size: 2.25" (L) x 1.75" (W) x 0.85" (D)

Installation

Please make sure mount this module box near the battery to prevent any water damage

Wiring:

Red wire: connect to battery positive terminal
Black wire: connect to battery negative terminal
When starting the engine, if the LED lamps don't light up or is flickering, connect the blue wire to fuse box ACC 12V+
White wire: optional dimming feature, connect to headlight +
Yellow wires: optional turn off feature when using turn signal, connect to left and right turn signal +
Green wire: optional strobe feature, connect to any 12V+ to enable the feature

Questions & Answers

Ask a Question

Do you have the installation tutorial video of Toyota Senna 2015?

Unfortunately, we do not have any videos available.

Where is the easiest way to tie in to acc feed on a 2006 ram truck

The ACC 12V+ is located in the fuse box in the engine bay. To find a suitable ACC 12V+ location, you'll first need to open up your fuse box to test the relays. An ACC 12V+ location only gets power only when the car starts. If you can't find a unused relay socket, you'll need to pull off one relay in use. Try to pull out either the fan, horn, AC, and NOT the ECU, IGN etc.

Check out this video tutorial for a step-by-step walkthrough on how to find the ACC 12V+.

https://youtu.be/Q3ZBHG24ghY

Have a DRL set that has 18 watts capacity each assembly. Left n right total 36 watts capacity. Will this controller module relay box work for the above? Pls reply.

This universal LED daytime running light automatic ON/OFF controller module box will only work for LED DRL that has 12W capacity or less.
 

Does it provide to input signal from high beam to turn off DRL while high beam is on?

The Auto DRL module doesn't have that feature. It turns on when the engine is on and turns off when the engine is off. It has an optional wire that connects to the positive headlight which will dim the DRL.  

Hello, is it dimmer or ON/OFF day lights

There is no dimmer feature with this module box, just on/off if you decide to tap the optional headlight wire to the headlight (+).