This tutorial guide will show you how to install the 2018-up Jeep Wrangler JL Sport Trim white and amber sequential LED turn signal lights (31-002).
This kit will only work for Wranglers with the single incandescent turn signal bulb. Double check the photo below!
Β
Step 1:Β Remove the 2 bolts in the wheel well behind the turn signal lamps
Step 2:Β Pull back the plastic and then remove the stock bulb
Step 3:Β Plug into the socket andΒ attach the Left and Right red wires to the Y shape adapter and run to the ACC12V+ fuse box (continued in step 6). Mount the resistor to a metal surface.
Step 4:Β Insert the LED strip light at an angle. (We removed the lamp to better show the next steps)
Step 5:Β Rotate the LED strip light so that it's straight in the housing (housing removed and lit to better show this step)
Step 6:Β Run the Y shape adapter to the fuse box.
Step 7:Β Connect to the micro fuse of the Rear WIPER
Step 8:Β Test lights and make adjustments
