2016-up Honda Civic Front License Plate Relocation Bracket Kit Installation Guide

This is an installation tutorial on how to mount the license plate mounting bracket relocation kit onto the 2016 and later Honda Civic sedan or coupe (AA2144). Before you get started, please note that this installation will require some minor drilling in order to install this license bracket. However, the drilled holes will be located on your under-engine shield, which is not noticeable or seen under normal circumstances. The drilled holes will not be apparent and ensure that your license plate will look uniform.

Step 1: Remove the plastic fasteners below, located on the driver side.

 

 

Step 2: Use the plastic fasteners to secure your license plate mounting bracket by the holes at the far end.

 

At this point, your license plate will look crooked if the steel license plate bracket is left hanging.

 

Step 3: Drill holes into your under-engine shield where the license plate relocator's middle mounting holes lie.

 

Secure the license plate mounting bracket using the included bolts and washers.

 

 

Step 4: Mount your license plate onto the steel license bracket. You may now enjoy your Honda Civic's new offset license front-end look!

 

Find this and more license plate brackets today!