You can find this product under Toyota Tacoma Fog Lamps (89-346).
Step 1: Let's focus on the garnish cover located at the fog lamp location. These Toyota Tacoma fog lamps are good for base model adding fog lamps or other models for replacement. You'll need to either remove the garnish cover when you start the installation process.
Step 2: Directly install your new fog lamp assemblies from the back and pay attention to the left/right difference before bolting on.
Step 3: Install the fog lamp bezel cover over the fog lamp location.
Step 4: Connect the wiring harness. Tap black wire to ground, red wire to battery positive. Tap trigger wire to the fuse box ACC. You can also check out Truck LED wiring guide to see how to connect the wires for power.
Plug in the switch and then mount the switch at an open location like so:
