This installation guides applies for 35-806 TRD Pro Grille Center Fit LED Light Bar Kit For 2016-2023 Toyota Tacoma
Step 1) Important Installation Note: Before proceeding with the light bar fitting, make sure your Tacoma is equipped with an OEM or aftermarket TRD Pro grill; remove the letters. Please be aware that applying the brackets may result in some marks, as they need to clamp/mount onto the grille (refer to the provided picture for reference).
Step 2) Lay down the grille facing the back and insert the two L-shaped brackets as demonstrated in the pictures.
Step 3) Place the LED light bar in between the two L-shaped brackets.
Step 4) Securely mount the LED light bar using the provided screws and washers in the specified combination (1 big washer and 2 small washers).
Step 5) Once all screws are in place, tighten them securely and proceed to install the relay harness to enjoy your new grille light bar!
