9005 LED DRL Daytime Running Light and Decoder Installation Guide

You can find this product under LED Daytime Running Lights

Case 2 (For LED_SKU44+R2 or LED_SKU45+R2)

Installation Diagram (Click the picture to enlarge)

Make sure the car is off, remove both left and right stock daytime running light bulbs and harness. Then connect back with the special harness to one side, and one resistor decoder to the other side.

Plug both LED bulbs to the special wiring and plug the other resistor decoder as well

Install back with the LED bulbs on each side and enjoy the new LED Daytime Running Lights!

Adjust text colors
Checked mark
Adjust heading colors
Checked mark
Adjust background colors
Checked mark