Audi Q3 Q5 Q7 CANbus Error Free LED Backup Light Bulb Installation Guide

This installation tutorial will show you how to replace your stock OEM backup reverse light bulbs with the exclusively designed CAN-bus error free xenon white LED backup light bulbs for the Audi Q3, Q5, and Q7 SUVs. After this straightforward installation, your Audi's back end will be much brighter and much more noticeable as you back up.

Step 1: Locate the tail light access points.

Use a flathead screwdriver to open the access panels. We recommend covering the flathead screwdriver with masking tape to prevent any scratching from occurring.

Step 2: Loosen the screws to release the tail light housing. Find the screw by looking upwards at a 45 degree angle.

Use this head to unscrew the bolt.

Step 3: Take off the tail light housing from your Audi Q3 Q5 Q7 SUV by prying it with the masking tape covered flathead screwdriver.

Step 4: Remove the OEM factory light bulb indicated by the red circle. Replace it with the CAN-bus LED backup reverse light bulb.

Step 5: Clip back on the tail light housing now equipped with the LED backup light bulb. Tighten the screw in the access panel to fully lock in the tail light housing. Close the panel cover to finish. You may now enjoy your Audi's brand new error free LED taillight reverse lights!

Shop for this and more LED backup reverse lights today!