Audi Side Door LED Courtesy Puddle Light Installation Guide

You can find this product under Audi LED Door Courtesy Lights (75-011).

1.) Using a small flat head screw driver, carefully pry open the door light housing, it should pop down.

2.) Unplug the housing from the wiring connector.

3.) Using the same flat head screw driver, carefully open the plastic lens from the housing.

4.) Replace the original light board with our LED panel and put it back together.

5.) Re-install all the components back into the door following the steps in reverse order and enjoy your new LED door lights!

Adjust text colors
Checked mark
Adjust heading colors
Checked mark
Adjust background colors
Checked mark