BMW LED Angel Eye Halo Ring Installation Guide

You can find this 5W High Power LED BMW Angel Eyes (75-000) here.

1.) Open your hood and locate the headlight, there will be five (5) Torx screws that will have to be removed in order to remove the headlight. Three (3) are located on the top and are circled in red and two (2) more are behind the headlight. The headlight may have to be gently wiggled and moved around to get it out.

2.) Set the headlight on top of your engine bay and remove the wire harness that is attached to it.

3.) Once you have the head light removed, set aside and twist open the angel eye housing cap which is circled in red. The reason why we want to remove the headlight is because it is a very tight space to work with and you will have more leverage in replacing the light.

4.) Once you have the cap removed, you will see that the high beam bulb is blocking the way. Simply twist and remove the high beam bulb and set aside. Twist and remove the angel eye bulb as well.

5.) Replace the stock bulb with our 5w LED Angel Eye Marker Bulb. Follow the steps in reverse order to re-assembly all the components back together. Repeat the same procedure on the other side.

6.) Enjoy your new 5w LED Angel Marker Bulbs!