How To Install 2007-21 Toyota Tundra 3rd Brake Light

Installation Guide for 2007-2021 Toyota Tundra Full LED third brake light. (72-108)

1) Remove the back pillar enough so you can slide the liner by.

2) Remove the clips located to the side and by the window.

3) Use a plastic remover and gently pry down the headliner close to the rear window.

4) Slide hand now inside the liner and ceiling and gently pry down on the two clips - - they are almost 6 inches inwards, and more towards the middle.

5) Slide 10mm magnetic socket into pocket where the neck of the bolt is and untighten it. Be careful going back there.

6) Once the 10mm are out, the pry out light from bed of truck.

You can also watch the video on how to install the 3rd brake light.