This installation guides applies for 70-895 OEM Bumper Fit Turn Signal Replace Switchback LED Daytime Running Light Kit Compatible with Infiniti 2014+ Q50 Q50S.
Please note that this product is not 100% symmetric. This is not some defect or damage.
Installation Guide
Step 1). Remove the OEM lower bumper turn signal lamps. They are held by three screws ONLY.
Step 2). Afterwards install back with new sequential blink switchback LED DRL/turn signal lights, and connect the black adapter to the stock turn signal socket.
Step 3). Repeat on the other side and connect both yellow wires to the headlight's positive terminal to activate the DRL driving light feature.
Step 4). The in-line load resistor has been pre-installed to prevent hyper flashing of the LED turn signal, eliminating rapid blinking issues.
Installation Video