Lexus Toyota Scion OEM Fit LED Fog Light Installation Guide

You can find this product under Lexus Toyota OEM Fit LED Fog Lights

1.) On the side that you are working on first, turn the wheel away from you to gain access to the inner fender liner. The fender liner is held on by various clips or bolts.

2.) Once the liner has been removed, set it aside to gain access to the back of the fog light housing. Remove the bolts or screws that hold the factory assembly into the bumper.

3.) Connect the factory harness to the LED fog light assembly and then pop it back in.

4.) Re-install all the screws and bolts that were removed when removing the factory fog light.

5.) Repeat the same procedure on the other side and you’re done!