You can find this product under 2010-2014 Ford Raptor SVT LED Light Bar Fog Lamp Kit (70-205-White).
Q: What truck will this pair of LED light bar fog lights fit on?
A: The 36W CREE LED fog light kit is made to fit onto the front bumper fog lamp opening of the 2010 through 2014 Ford Raptor SVT.
Q: How do I install my Ford F150 Raptor LED fog lights?
A: Follow these steps to mount and install the double row LED light bar fog lamps:
Step 1: Remove screws 2 and 3 on the angle bracket behind the fog lamp opening.
These bolts are the most accessible to unscrew so these need to be unbolted with a socket wrench first.
Step 2: Loosen screw 1. First remove the screw securing the wheel well, as well as the screw holding the plastic piece behind the wheel well.
Line the bumper with a cloth or packing material to protect your Ford Raptor's paint job. Use a long flathead screwdriver to use as a lever to push the plastic piece up, revealing screw 1.
Insert a size 10 socket over screw 1. Apply the wrench onto the socket and loosen the screw.
Step 3: Slide in and shift the mounting bracket to lock it in. Tighten the bolts to secure the metal mounting brackets.
Make sure you secure the mounting brackets its corresponding sides, with the curved edge facing the fog light opening.
Step 4: Thread an M10 screw through the second holes of the two L-shaped brackets together. Secure the L-bracket assembly onto the mounting bracket and adjust it to your desired angle. Repeat steps 1-4 for the other side.
*UPDATE* We have since updated the metal mounting bracket design to be one singular piece. There is no need to lay one L-bracket over another in a specific way to install the small form LED light bars. The installation process remains the same.
Step 5: Mount the double row LED light bars in between the metal support brackets. Wire them using the included relay wiring harness with switch.
Step 6: Test the LED light bar fog lamps to make sure they light up. Once you've confirmed that they have, you may now enjoy your Ford Raptor's brand new set of CREE LED light bar fog lamps!
Q: My Ford Raptor has switches built into my interior. Is there a way I can hook up my LED fog lights so that I can turn them on and off using my switches?
A: Yes, there are a few steps you can take to wire your LED fog lights to your interior switches.
Step 1: Wire your LED pod lights to the included relay wiring harness. Remove the on/off switch and cover the socket with black tape.
Step 2: Find your hotwires that are connected to your aux switches.
Step 3: Connect the factory aux switch input to the aux switch wire of your choice.
For more details, read our article on how to install LED products to use with Ford Raptor aux switches.